<![CDATA[Van Dusen Racing Boats - Composite Engineering: New Products - Rigging]]> https://comp.mybigcommerce.com Sat, 25 Jul 2026 22:29:25 +0000 <![CDATA[Wing rigger mounting bar]]> https://comp.mybigcommerce.com/wing-rigger-mounting-bar/ Mon, 15 Aug 2011 15:14:31 +0000 https://comp.mybigcommerce.com/wing-rigger-mounting-bar/ Wing rigger mounting bar

Each wing has two wing rigger mounting bars, which are attached by bolts to the underside of the wing. The holes on each end of the bar allow the wing to be attached to the boat. The holes on the sides of the bar allow the footboard with its shoes to be attached in a range of positions. The&nbs..

Price: $35.00

]]> Wing rigger mounting bar

Each wing has two wing rigger mounting bars, which are attached by bolts to the underside of the wing. The holes on each end of the bar allow the wing to be attached to the boat. The holes on the sides of the bar allow the footboard with its shoes to be attached in a range of positions. The&nbs..

Price: $35.00

]]> Each wing has two wing rigger mounting bars, which are attached by bolts to the underside of the wing. The holes on each end of the bar allow the wing to be attached to the boat. The holes on the sides of the bar allow the footboard with its shoes to be attached in a range of positions. The&nbs..]]> <![CDATA[Wing height raising bar, 3/4"]]> https://comp.mybigcommerce.com/wing-height-raising-bar-3-4/ Mon, 15 Aug 2011 15:14:31 +0000 https://comp.mybigcommerce.com/wing-height-raising-bar-3-4/ Wing height raising bar, 3/4"

Wing rigger height raising bar adds 3/4" to the wing's height while keeping it on a stable platform. The standard size is 7.25 inch. 

We also have an extended version (8.5 inch), which allows the wing rigger to be mounted further forward by about 1.5 inch. Please email us at vd..

Price: $49.50

]]> Wing height raising bar, 3/4"

Wing rigger height raising bar adds 3/4" to the wing's height while keeping it on a stable platform. The standard size is 7.25 inch. 

We also have an extended version (8.5 inch), which allows the wing rigger to be mounted further forward by about 1.5 inch. Please email us at vd..

Price: $49.50

]]> Wing rigger height raising bar adds 3/4" to the wing's height while keeping it on a stable platform. The standard size is 7.25 inch. 

We also have an extended version (8.5 inch), which allows the wing rigger to be mounted further forward by about 1.5 inch. Please email us at vd..]]> <![CDATA[Oarlock pin, titanium, 13mm]]> https://comp.mybigcommerce.com/oarlock-pin-titanium-13mm/ Mon, 15 Aug 2011 15:14:30 +0000 https://comp.mybigcommerce.com/oarlock-pin-titanium-13mm/ Oarlock pin, titanium, 13mm

The titanium pin - 13mm in diameter - is used as a standard part in the rigging assemblies of Van Dusen racing boats. The pin does not include nuts and washers, therefore please specify if needed. Height washers should be ordered separately. 

Price: $54.00

]]> Oarlock pin, titanium, 13mm

The titanium pin - 13mm in diameter - is used as a standard part in the rigging assemblies of Van Dusen racing boats. The pin does not include nuts and washers, therefore please specify if needed. Height washers should be ordered separately. 

Price: $54.00

]]> The titanium pin - 13mm in diameter - is used as a standard part in the rigging assemblies of Van Dusen racing boats. The pin does not include nuts and washers, therefore please specify if needed. Height washers should be ordered separately. 

]]>